User Tools

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision		Previous revision
geoscene3d:project_content:objects:well_logs:logs_object [2020/02/09 13:30] – created rebecca130301_gmail.comgeoscene3d:project_content:objects:well_logs:logs_object [2020/03/20 17:46] (current) – external edit 127.0.0.1
Line 1: Line 1:
 ====== Logs Object ====== ====== Logs Object ======
  
-The Log object visualizes well logs. Multiple logged parameters may be visualized for multiple wells simultaneously. Log data are read from a  [[Logs Dataset|]]. Logs are shown as data series on a chart next to the well location.+The Log object visualizes well logs. Multiple logged parameters may be visualized for multiple wells simultaneously. Log data are read from a [[:geoscene3d:project_content:datasets:logs_dataset|]]. Logs are shown as data series on a chart next to the well location.
  
 NOTE: The "Refresh Data" button must be pressed to refresh the data from source. The "Apply" button will only affect the visual appearance. Data are refreshed automatically when adding new data series to the log chart. NOTE: The "Refresh Data" button must be pressed to refresh the data from source. The "Apply" button will only affect the visual appearance. Data are refreshed automatically when adding new data series to the log chart.
Line 7: Line 7:
 Every time a log chart becomes visible a bitmap containing the chart is generated. This may cause that the navigation through the scene is not smooth. Every time a log chart becomes visible a bitmap containing the chart is generated. This may cause that the navigation through the scene is not smooth.
  
-==== +==== General Tab ====
-General Tab  ====+
  
-__ +__Name:__ Object name as seen in the Object Manager\\ 
-Name: __ +__Visible:__ Show/Hide the object
-Object name as seen in the Object Manager \\ +
-__Visible:__ +
-Show/Hide the object+
  
-** +**Vertical Scale Mode ** \\ 
-Vertical Scale Mode ** \\ +__Depth:__ Left axis scale is zero at the top of the log and increases downwards with depth.\\ 
-__Depth:__ +__Elevation:__ Left axis scale is terrain elevation at the top of the log and decreases downwards with depth.
-Left axis scale is zero at the top of the log and increases downwards with depth. \\ +
-__Elevation:__ +
-Left axis scale is terrain elevation at the top of the log and decreases downwards with depth.+
  
-** +**Resampling and Smoothing ** \\ 
-Resampling and Smoothing ** \\ +__Resample:__ Data will be re sampled using depth intervals. This will reduce the amount of data points and will improve performance and project save/load time. Data will be re sampled and averaged using the __ interval __ . The resulting value for each interval is simply the mean of the original data points within the mean interval (moving average).\\ 
-__Resample:__ +__Smooth:__ Data will be smoothed using depth intervals. In contrast to re sampling the amount of data points will not be reduced but will produce a smoother line. Data will be averaged using the __ interval__. The resulting value for each interval is simply the mean of the original data points within the mean interval (moving average).
-__ __Data will be re sampled using depth intervals. This will reduce the amount of data points and will improve performance and project save/load time. Data will be re sampled and averaged using the  __ +
-interval __ +
-. The resulting value for each interval is simply the mean of the original data points within the mean interval (moving average). \\ +
-__ +
-Smooth: __ +
-Data will be smoothed using depth intervals. In contrast to re sampling the amount of data points will not be reduced but will produce a smoother line. Data will be averaged using the  __ +
-interval __ +
-. The resulting value for each interval is simply the mean of the original data points within the mean interval (moving average).+
  
-** +**Vertical Axis Options ** \\ 
-Vertical Axis Options ** \\ +__Depth Axis Title:__ Title for vertical axis showing depth.\\ 
-__Depth Axis Title:__ +__Elevation Axis Title:__ Title for vertical axis showing elevation.\\ 
-Title for vertical axis showing depth. \\ +__Show Secondary Axis:__ If left vertical axis is depth the optional right axis will be elevation. If left vertical axis is elevation the optional right axis will be Depth.
-__Elevation Axis Title:__ +
-Title for vertical axis showing elevation. \\ +
-__Show Secondary Axis:__ +
-If left vertical axis is depth the optional right axis will be elevation. If left vertical axis is elevation the optional right axis will be Depth.+
  
-** +**Fit To Surface ** \\ 
-Fit To Surface ** \\ +__Active:__ When checked and a surface is selected in the "Available Surfaces" drop down all the logs are fitted to that surface. The fitting is purely visual - the data are not changed.\\ 
-__Active:__ +__Available Surfaces:__ Available surfaces in the project that can be used for fitting. 
-When checked and a surface is selected in the "Available Surfaces" drop down all the logs are fitted to that surface. The fitting is purely visual - the data are not changed. \\ +==== Data Tab ====
-__Available Surfaces:__ +
-Available surfaces in the project that can be used for fitting.+
  
-==== +__Dataset:__ The Logs object visualizes a [[:geoscene3d:project_content:datasets:logs_dataset|]].
-Data Tab  ====+
  
-__ +==== Geometry Tab ====
-Dataset: __ +
-The Logs object visualizes a  [[Logs Dataset|]].+
  
-==== +The Geometry Tab contains settings for the chart shown in 3D. Press "3D Chart Data Setup…" To add log data series from the dataset to the chart.\\ 
-Geometry Tab  ====+__3D Chart Data Setup…:__ Opens the [[:geoscene3d:project_content:objects:well_logs:log_charts_editor|]].
  
-The Geometry Tab contains settings for the chart shown in 3D. Press "3D Chart Data Setup..." To add log data series from the dataset to the chart. \\ +**3D Chart Settings ** \\ 
-__3D Chart Data Setup...:__ +__Center Offset:__ Log chart plane horizontal offset from the well location. If a well is visible at the same position as the log an offset is necessary to avoid overlap.\\ 
-Opens the  [[Log Charts Editor|]].+__Width (scene units):__ Width of the chart plane in scene units, e.g. meters\\ 
 +__Horiz. Bitmap Resolution (pixels):__ Horizontal resolution in pixels of the bitmap that shows the log.\\ 
 +__Visible Distance:__ Beyond this distance logs are not visible. This distance should be short to improve performance.\\ 
 +__Min. Turn Distance:__ Logs are not turned towards the camera when closer than this distance. 
 +==== Material Tab ====
  
-** +Material settings for 3D chart\\ 
-3D Chart Settings ** \\ +__Opacity:__ Degree of opacity. 1=fully opaque, 0=fully transparent (enabled when Blending Mode = Transparency).\\ 
-__Center Offset:__ +__Advanced:__ Shows the advanced [[:geoscene3d:application:misc:material_editor|]]
-Log chart plane horizontal offset from the well location. If a well is visible at the same position as the log an offset is necessary to avoid overlap. \\ +
-__Width (scene units):__ +
-Width of the chart plane in scene units, e.g. meters \\ +
-__Horiz. Bitmap Resolution (pixels):__ +
-Horizontal resolution in pixels of the bitmap that shows the log.  \\ +
-__Visible Distance:__ +
-Beyond this distance logs are not visible. This distance should be short to improve performance. \\ +
-__Min. Turn Distance:__ +
-Logs are not turned towards the camera when closer than this distance.+
  
-==== +==== Print Tab ====
-Material Tab  ====+
  
-Material settings for 3D chart \\ +The Print Tab contains printing settings. Press "Print Chart Data Setup…" To add log data series from the dataset to the chart and adjust printable report settings.\\ 
-__Opacity:__ +__Report Setup And Print…:__ Opens the [[:geoscene3d:project_content:objects:well_logs:log_charts_editor|]].
-Degree of opacity. 1=fully opaque, 0=fully transparent (enabled when Blending Mode = Transparency). \\ +
-__Advanced:__ +
-Shows the advanced  [[Material Editor|]]+
  
-==== +**Same Maximum Depth For All Logs ** \\ 
-Print Tab  ==== +__Active:__ When checked all printed log charts will have the same vertical min and max scale on the vertical axis.\\ 
- +__Common Depth:__ Common log depth.
-The Print Tab contains printing settings. Press "Print Chart Data Setup..." To add log data series from the dataset to the chart and adjust printable report settings. \\ +
-__Report Setup And Print...:__ +
-Opens the  [[Log Charts Editor|]]. +
- +
-** +
-Same Maximum Depth For All Logs ** \\ +
-__Active:__ +
-When checked all printed log charts will have the same vertical min and max scale on the  vertical axis.  \\ +
-__Common Depth:__ +
-Common log depth.+
  
  

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also, you acknowledge that you have read and understand our Privacy Policy. If you do not agree, please leave the website.

More information