User Tools

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
geoscene3d:inst_licens:computerspecifikations [2023/10/03 00:59] – sangeoscene3d:inst_licens:computerspecifikations [2024/06/27 15:18] (current) – external edit 127.0.0.1
Line 1: Line 1:
-====== Computer Specifikations ======+====== Download, install and activate GeoScene3D ======
  
 This section describes how to download, install and activate GeoScene3D. This section describes how to download, install and activate GeoScene3D.
  
 ==== Versions ==== ==== Versions ====
-GeoScene3D has several modules and extensions, all compiled in the same installation. The functionality is + 
-automatically handled by your license file.+GeoScene3D has several modules and extensions, all compiled in the same installation. The functionality is automatically handled by your license file.
  
 ==== Editions ==== ==== Editions ====
-  * Unordered List ItemViewer: With no valid license, GeoScene3D starts up as a viewer edition. Here, all projects produced in Geoscene3D, Basic- and Builder-editions, can be opened and viewed but cannot be edited.+ 
 +  * Viewer: With no valid license, GeoScene3D starts up as a viewer edition. Here, all projects produced in Geoscene3D, Basic- and Builder-editions, can be opened and viewed but cannot be edited.
   * Basic: With a valid license, projects can be created and all data can be imported and themed.   * Basic: With a valid license, projects can be created and all data can be imported and themed.
   * Builder: Works with a valid license. Includes the functionality of the Basic-edition, the Builder-edition can interpolate point data in both 2D and 3D and interpret points and surfaces with editing tools.   * Builder: Works with a valid license. Includes the functionality of the Basic-edition, the Builder-edition can interpolate point data in both 2D and 3D and interpret points and surfaces with editing tools.
  
-More extensions are available. Check our website (geoscene3d.com) or contact support@geoscene3d.com for more information.+More extensions are available. Check our [[https://i-gis.dk/geoscene3d/|website]] or contact support@geoscene3d.com for more information.
  
 ==== System requirements ==== ==== System requirements ====
-GeoScene3D requires above average hardware. The better the hardware is the better experience and 
-performance you get. A good graphics card is the most important. 
  
-=== //For desktop PC:// ===+GeoScene3D requires above average hardware. The better the hardware is the better experience and performance you get. A good graphics card is the most important. 
 + 
 +=== For desktop PC: === 
 Minimum configuration: Minimum configuration:
-  * Unordered List ItemCPU: i5 2.7 GHz or equivalent with AMD+ 
 +  * CPU: i5 2.7 GHz or equivalent with AMD
   * RAM: 8 GB   * RAM: 8 GB
   * Graphic card with 2 GB dedicated RAM with OpenGL 2   * Graphic card with 2 GB dedicated RAM with OpenGL 2
Line 26: Line 29:
  
 //Recommended configuration:// //Recommended configuration://
-- CPU: i7 3.0 GHz + 
-- RAM: 16 GB +  * Unordered List ItemCPU: i7 3.0 GHz 
-- Graphic card with 4 GB dedicated RAM +  * RAM: 16 GB 
-(Nvidia GTX 560) +  * Graphic card with 4 GB dedicated RAM (Nvidia GTX 560) 
-- OS: Windows 10 Professional or higher +  * OS: Windows 10 Professional or higher 
-For laptop: + 
-The choice of the graphic card will automatically select the corresponding CPU and RAM. Please check +=== For laptop: === 
-NotebookCheck.net for the graphic card ranking. + 
-Minimum configuration: +The choice of the graphic card will automatically select the corresponding CPU and RAM. Please check NotebookCheck.net for the graphic card ranking. 
-- Graphic card: in the lower mid –range + 
-graphics cards and higher low-midrange +//Minimum configuration:// 
-graphics cards + 
-- Windows 10 professional or higher +  * Graphic card: in the lower mid –range graphics cards and higher low-midrange graphics cards 
-Recommended configuration: +  * Windows 10 professional or higher 
-- Graphic card: in the high mid –range + 
-graphics cards and lower high-end graphic +//Recommended configuration:// 
-cards + 
-- Windows 10 professional or higher+  * Graphic card: in the high mid–range graphics cards and lower high-end graphic cards 
 +  * Windows 10 professional or higher 
 + 
 +==== Download ==== 
 + 
 +Go to the “Download” page (see Figure 1) and the GeoScene3D installation can be downloaded. Copy the installation to a temporary place and run the installation from here. 
 + 
 +{{  :geoscene3d:inst_licens:screenshot_2023-10-03_091442.png  }}//Figure 1: Press "Register" (blacksquare) to register as a user at our website and to be able to download GeoScene3D. Then press "Download"// 
 + 
 +==== Database Drivers ==== 
 + 
 +Some general information can also be found at this link: [[:geoscene3d:inst_licens:database_drivers|]] 
 + 
 +=== Access === 
 + 
 +GeoScene3D use Access databases. Download the Access Engine that matches your Microsoft Office. If downloading a driver to 32-bit Microsoft Office open the zipfile and follow the instruction in the ‘GeoScene3D 64 bit drivers installation.docx’. If downloading to 64-bit Microsoft Office just run the installer. (See Figure 2) {{  :geoscene3d:inst_licens:screenshot_2023-10-03_092512.png  }}//Figure 2: Driver download page.// 
 + 
 +=== Firebird === 
 + 
 +To be able to load firebird database in GeoScene3D, an installation of Firebird is required. Go to the “Download” page (see Figure 2) to download a Firebird Server. 
 + 
 +=== License files === 
 + 
 +It requires a license to be able to run GeoScene3D as a Basic- or Builder-edition. Common to both license types are that the user needs a license file issued by I•GIS. It requires a unique machine code for the computer where GeoScene3D is to be installed to be able to issue a license file. The license system does not support installations on terminal servers. 
 + 
 +==== Activation of GeoScene3D ==== 
 + 
 +After successful installation, GeoScene3D will work as a Viewer-edition. To activate a GeoScene3D Basic- or Builder-edition, you need a license file, which is unique for the computer where GeoScene3D is installed. The unique hardware ID, which is required to generate a license can be found in GeoScene3D with the following steps: 
 + 
 +In GeoScene3D, in the main toolbar, select "Help" → "Machine ID and license (see Figure 3). This opens the window (see Figure 4). Now press "Send Email To I-GIS…". Alternatively, the ID can be copied and sent to I•GIS at support@geoscene3d.com. 
 + 
 +{{  :geoscene3d:inst_licens:screenshot_2023-10-03_093531.png  }}//Figure 3: Open the license request for GeoScene3D// 
 + 
 +{{  :geoscene3d:inst_licens:screenshot_2023-10-03_094123.png?400  }}//Figure 4: Press the "Send Email To I-GIS…" button to send a license request to GeoScene3D// 
 + 
 +You will receive an email from I•GIS containing a license file. This license file should be placed somewhere locally on your computer, e. g. in the installation folder as shown in figure 4. If you do not have access to the installation folder, it is recommended you place it somewhere you have access. Point the directory towards the license file and GeoScene3D should be ready for use either as a Basic- or Builder-edition. 
 + 
 +==== Trouble shooting ==== 
 + 
 +Does GeoScene3D still run as a viewer edition then check out the following: 
 + 
 +  * Is the license file placed correctly? Check in "Help" - "Machine ID and License" - browse to see if the license file is placed correctly. 
 +  * Is the license file generated to the right computer? Check license ID and machine ID with the use of notepad. 
 + 
 +If there are any questions or other, please contact I•GIS: support@geoscene3d.com 
 + 

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also, you acknowledge that you have read and understand our Privacy Policy. If you do not agree, please leave the website.

More information